Mxflow BD Series Dryers offer the best alternative offers you can find with their unique design and safe storage feature. Drying, storage and ventilation can be done in the same station. Due to low drying temperatures and slow cooling rate, maximum quality drying of your product is ensured.

It applies the mixed drying method, which is an efficient drying method, by drying with the air flow method perpendicular to the flow direction of the grain.
It has a structure suitable for continuous drying.
Thanks to the high air velocity, large capacities are achieved in small volumes.
Using forward curved silent centrifugal fans, high flow low cost airflow is achieved. The equipment used is of high quality and long-lasting.
The burner computer keeps the continuity of the combustion under control by constantly questioning the air flow, temperature and the presence of the flame.
Many different types of products can be dried in the same dryer.

ROOF FILLING AND DISTRIBUTION SECTION:
It consists of the conical prism filling and distribution section at the top of the machine. While the grains move downwards with the effect of gravity, the rings placed in the inner parts ensure the continuous distribution of the grain. In this way, the grain is distributed evenly throughout the surface in the roof filling part. This zone is used as the drying zone. Hot air passes through the product and takes the moisture of the product.

UNLOADING SYSTEM: :
Servo motor is used in Mxflow BD Series dryers. Discharge covers can be stopped in many positions such as open, half open, fully open. Thanks to the rope mechanism controlled by the servo motor, all the doors are opened and closed equally. In case the discharge system is active, the combustible group equipment is disabled as a safety precaution. Two-stage safety sensors are used on the unloading mechanism against rope breaks.

BURNING SYSTEM:
During the combustion process, the safety equipment remains active. A malfunction in one of the sensors is given to the screen as a notification to the operator. It has the ability to work continuously. Equipment with at least CE certificate is used.

CONTROL PANEL:
Mxflow E series dryers have a touch screen controlled panel. The user can activate the feature they want to activate with a single button. Temperature control is done via PID and gas saving is provided thanks to the modulating valve. Combustion control relays are continuously active and provide safe combustion thanks to instant scanning times

WORKING PRINCIPLE:

• The product is filled from the top of the dryer, where it is distributed between the rings in the roof.
• The centrifugal fan quietly and efficiently delivers a large amount of air into the dryer.
• Allowing it to carry more moisture . The burner flame is modularly controlled for constant drying temperature.
• Thanks to the channels connected to the hot air chamber, the dehumidification process takes place from the product in the roof.
• Air outlet channels are arranged at appropriate distances to allow air flow inside the product. Thanks to these channels, moisture-laden air leaves the machine.
• Servo -controlled discharge flaps.
• Cooling and safe storage are provided by the fans in the product storage section.

ADVANTAGES:

• Product losses are low and product quality is maintained.
• It provides homogeneous drying.
• Thanks to its non-porous design, it does not need constant cleaning.
• Thanks to flame modulation, it saves gas.
• Energy loss is less, efficiency is high.
• The product can be stored in the silo.
• Thanks to slow cooling, the rate of stress and cracks in the products decreases.
• By reducing the number of product transfers, possible breakage and product loss are prevented.
• Using Batch Drying Mode

Product Filling	Product Drying	Product Discharge	Product Cooling and Storage
The wet product is filled from the holding silos to the upper part of the drying. The cover of the cooling fan is kept closed. Fan and burner system provides hot air inside.	Drying takes place by passing the heated air through the product. The product passing to the lower part is cooled by the ventilation fan. The hot air coming out of the cooling helps to heat the air in the upper part and energy gain is provided.	The product, which reaches the desired humidity value, is discharged to the hot product storage area with the servo motor discharge system. During discharge, the fan and burner group are kept closed for safety. The previous steps are repeated for the continuation of the process.	If the wet product runs out or the storage area is full, the system will not allow new drying. Existing products can be cooled and stored.

Control System HMI & PLC

Maximum Storage Capacities (MT)
Number of Rings	08 Model	09 Model	10 Model
6	63,98875	81,1125	--
7	89,58425	113,5575	--
8	115,1798	146,0025	181,692
9	140,7753	178,4475	222,068
10	166,3708	210,8925	262,444
11	191,9663	243,3375	302,82
12	217,5618	275,7825	343,196
13	243,1573	308,2275	383,572
14	268,7528	340,6725	423,948
15	294,3483	373,1175	464,324
16	319,9438	405,5625	504,7
17	345,5393	438,0075	545,076
18	371,1348	470,4525	585,452
19	396,7303	502,8975	625,828
20	422,3258	535,3425	666,204
21	447,9213	567,7875	706,58
22	473,5168	600,2325	746,956
23	499,1123	632,6775	787,332
24	524,7078	665,1225	827,708
25	550,3033	697,5675	868,084
26	575,8988	730,0125	908,46
27	601,4943	762,4575	948,836
28	627,0898	794,9025	989,212
29	652,6853	827,3475	1029,588
30	678,2808	859,7925	1069,964
31	--	--	1110,34
32	--	--	1150,716
33	--	--	1191,092
34	--	--	1231,468